hopefully someone can help. after crash checked aircraft everything was fine except crack on one arm. controller, aircraft and app all linked up and was working fine, after replacing the body shell and triple checking all cables were put back correctly. upon turning everything on. First thing I noticed was the battery in the app showed 0% and
The camera had slight contact to the flat cable while the gimbal tried to calibrate upon startup. In my case there was a little bit glue or something in the corner of the flat cable that stoped the gimbal in calibration. When the Phantom was turned off i could feel a litte drag while turning the camera down.
You most likely powered down the Phantom before stopping video recording. All you need to do is to put the Micro SD card back in the Phantom camera, then power up the Phantom (remove your propellers before hand in case you inadvertently start them turning. Wait for about 60 seconds then power down.
1#. I just upgraded firmware and upgraded remote. I ploaded DJI Go for my iphone 6s. I select my PH3A in the app "Connect your DJI device". The only thing on the screen is "How to Connect". I don't get camera view. I deleted the app an reinstalled it because it wasn't connecting. Now I got nothing. USB cord is plugged into remote and iphone
4#. It's the firmware upgrade that destroys circuits on the board, DJI know about this problem and have decided to turn a blind eye. Everything else on the control panel will work, the camera included, just no live feed. (See Photo). You will need to send the drone away for repair. 2019-3-10.
Before updating, take note of your preferred settings and readjust them in DJI GO 4 after the update. If the firmware update fails, restart the aircraft, remote controller and DJI GO 4 app or DJI Assistant 2, then try updating again. Overview: Date: 2018.10.24. Aircraft Firmware: v01.00.22.00. PhantomPilots is the leading online community for DJI Phantom drone enthusiasts and a member of the Drone Pilots Media Network. With over 6 million unique drone enthusiasts each year, we offer an incredible opportunity to promote your drone-related products or services. Hello. After not using my DJI Phantom 3 Professional during winter I have updated firmware to latest (v. 1.8.80) on both devices - RC, aircraft. DJI Pilot version for Android is also the latest - 2.8.1. And now entering to camera view I see only black screen. But camera is recording the pictures and video - problem is only that I don't see it on my phone. How I tried to solve: - rebooting RC
United States. Offline. 1#. Good day all, I've flown my Spark a number of times now but on two occasions I had an issue with the video record button and photo shutter button. In both cases, I set up the Spark where I wanted to start my shot and tried to hit the record button on the phone but nothing happened. I tried several times thinking the
no2jm0J.
  • 94u5vrnvmd.pages.dev/141
  • 94u5vrnvmd.pages.dev/689
  • 94u5vrnvmd.pages.dev/609
  • 94u5vrnvmd.pages.dev/440
  • 94u5vrnvmd.pages.dev/639
  • 94u5vrnvmd.pages.dev/78
  • 94u5vrnvmd.pages.dev/972
  • 94u5vrnvmd.pages.dev/837
  • 94u5vrnvmd.pages.dev/149
  • 94u5vrnvmd.pages.dev/654
  • 94u5vrnvmd.pages.dev/41
  • 94u5vrnvmd.pages.dev/771
  • 94u5vrnvmd.pages.dev/842
  • 94u5vrnvmd.pages.dev/535
  • 94u5vrnvmd.pages.dev/483

    • dji phantom camera not working